Did you just purchase an Oransi Air Purifier? Congratulations on your investment and thank you for not only supporting our company, but caring enough about the health of yourself and those around you to make a difference in the air quality.
Now that you've received your Oransi Air Purifier, let's walk through the general steps on setting up the unit and cleaning your air immediately.
Unboxing Your Air Purifier
How to remove the mod from packaging and setup.
Setting up the Max air purifier.
- When initially unboxing your Oransi air purifier, follow these immediate steps:
- Open Packaging & Remove Air Purifier
- Set Aside Instruction Manual
- Remove Protective Film
Once the package is open, locate the instructions and read them thoroughly to ensure your unit is assembled properly and all safety precautions are taken. Also, set your calendar for reminders for when the respective filters for your purifier will need to be replaced. See the filter calendar below, for your specific unit.
|Unit||Filter Type||Time To Replace|
|Finn||Replacement Filter Pack||Replace After 12-15 Months|
|Finn||Replacement UV Lamp||Replace After 12-15 Months|
|OV200||Replacement Filter Pack||Replace After 6-9 Months|
|Max||Replacement Filter Pack||Replace After 12 Months|
|EJ||Carbon Filter||Replace After 12 Months|
|EJ||HEPA Filter||Replace After 12 Months|
|Erik 650A||Combination Pre-Filter||Replace After 8-12 Months|
|Erik 650A||HEPA Filter||Replace After 2-3 Years|
Place With Purpose
While your air purifier will improve the air in any room, make sure to place the unit in the area where the air quality is worst or people spend the most time - to get the most usage out of your unit. If you’re at home, consider the bedroom, living room or kids’ playroom. If you’re at work, consider your office, the conference room, or kitchen.
Choose Your Settings
Depending on the Oransi air purifier unit you purchased, there are a few settings you may want to adjust, upon turning on your unit.
All Air Purifiers
Adjust according to how quickly you want the air cleaned. Silent is longest to purify, while Turbo purifies the fastest. On Erik Units, simply turn the dial to the approximate speed you desire.
The noise level is subjective. We suggest setting the fan speed to a noise level that is agreeable for you.
Max Air Purifier
By pressing the Power button for 3 seconds, you can turn off the light around the power button.
Turn this on for improved filter efficiency.
Set the unit to run, based on usage preference.
Finn Air Purifier
The UV button activates the UV-C germicidal lamp. This will work in any mode.
If the HEPA filter needs to be cleaned, HEPA Reset icon on LCD will illuminate and flicker. After cleaning the HEPA filter, RESET the HEPA filter by using a pin or needle to press the HEPA RESET Button.
Press this button to increase negative ions into the air, neutralizing free radicals, revitalize cell metabolism and enhance our immune system.
Now that your unit is properly placed and your settings are adjusted to your liking, enjoy cleaner air in your home or office. From there, stay up to date on filter updates and reach out to us here for further questions.
Did you lose the user manual for your Oransi air purifier? No problem. Below are manuals for each of our air purifiers. Print a copy and store somewhere important!