
Get to Know Oransi and the Products We Build
Replacement Filters.
Replacement combination Pre-Filter for the Erik650A air purifier. Can be used with any Erik model. Has a high efficiency mini-pleated HEPA filter media and 3.5+ pounds of our proprietary treated activated carbon for the removal of a wide spectrum of gases and odors. This filter should be replaced with every 12 months of use. **ARB approved for gas removal**
Replacement main HEPA filter for the Erik 650A air purifiers. Filters at a higher level than true HEPA and lasts 2-3 years. Note: this filter does not fit the other Erik models.
Availability: Orders placed by 2pm EST (M-F) usually ship same day.
Out of stock until July 20. Replacement V-Bank carbon filter for the Erik Multi-Carbon air purifier. Can also be used in the ERIK650A in place of the HEPA filter. Contains 14 pounds of activated carbon in a V-Bank shape for the removal of odors, gases, smoke.
Replacement pleated Pre-Filter for the Erik air purifier. This filter should be replaced with every 6-9 months of use.
Replacement pre-filter for the Erik air purifiers. This filter combines the dust holding capacity of a pleated filter with the odor adsorption of activated carbon. Custom sized for the Erik air purifier.
Out of stock until Nov 25. Replacement main filter for Ultra Plus. The true HEPA filter construction consists of a 16 ga. galvaneal frame and moisture-resistant microfine wet-laid fiberglass media. The rubber seal on the bottom of the filter frame enables it to seal to the frame and eliminate air from bypassing the filter. Note: this filter does not fit the ERIK650A. As an alternative, you can purchase the new HEPA Filter for Erik 650A or the Erik V-Bank Carbon Filter as long as you have the filter bracket to hold them in place.
Out of stock until Nov 25.
Replacement main filter for the Erik Ultra Plus air purifiers. Note: this filter does not fit in the ERIK650A. As an alternative, you can purchase the new HEPA Filter for Erik 650A or the Erik V-Bank Carbon Filter as long as you have the filter bracket to hold them in place.
Bracket that allows you to convert an Erik model with the large metal filters to hold the 650A HEPA or the Multi-Carbon. The bracket holds the large V-Bank filter in place.